ZTE ZXHN H108N is a quality router that is capable of the home as well as office use. If you are using it, you must know how to to its interface to make the necessary changes. If you are looking to learn the same, this post is specifically written for you.
Here, I will guide you on how to to the ZTE ZXHN H108N router using the default IP, name, and . I will also tell you about the default name and for this router model. And, as a bonus, we will also learn to troubleshoot the router issues.
ZTE ZXHN H108N Router
ZXHN H108N is a highly rated wireless router from ZTE. It is a 4-Port Wireless N300 ADSL2+ Modem Router capable of distributing a wireless network of up to 300 Mbps. This router comes with default configurations set for normal s. However, you can easily customize for power usage through its . For that, you’ll have to to the router.
The is the control center of the router from where you can customize the default configurations. There are many useful things you can do from there. Some of the most common ones are changing the WiFi SSID (name) and , tracking usage data, blocking websites, disconnecting devices, upgrading firmware, etc.
To to the ZXHN H108N router, you just need to follow the 3 simple steps. I have explained all of them briefly. Just follow my instructions and you’ll be done.
Step-1: Connect your device to the ZXHN H108N router
Firstly, turn on the router (If it is turned off), and connect your device to it using a wired or wireless connection. You can connect your Android smartphone or iPhone through WiFi, or connect your Windows or Mac PC using an ethernet cable.
I’d recommend using a Windows PC with a LAN connection as an ideal option. Once connected, check if the internet is working by opening any website.
Step-2: Access the Default Router IP in a browser
Every wireless router and modem comes with a default IP address assigned by the manufacturers. This IP is used to access its page. The default IP for the ZXHN H108N router is 192.168.1.1.
The next thing you have to do is open a web browser on your pc or mobile, enter 192.168.1.1 in the URL bar present above, and hit the search icon. Alternatively, you can also click on this link. If things go fine, you will see the ZTE router page on the screen
Note: You can use any browser like Chrome, Opera, Safari, Edge, Firefox, etc for this.
Step-3: Enter router credentials and
Once the ZTE router page opens, you will find two blank fields for name and respectively. You have to enter the router name and in these boxes. that you DON’T have to enter the WiFi name and here. The router name and are different.
If you don’t know them, you can try using the default router name and . The default name for ZXHN H108N is , and the default is . Both of them are in lower case. Just enter these in their given fields and click on the ‘’ button.
Let the page load, and you’ll be in the of your ZTE router.
ZTE ZXHN H108N Router
All wireless routers and modems come with default settings configured by the manufacturer. You can customize these settings according to your needs and bring the best performance out of the device. is the place where you can do that. It is also known as the page or interface.
There are many useful tweaks you can make to the router. Let’s take a look at them:
- Change WiFi SSID (name) and .
- Set a custom router name and .
- Switch Network Channel to alter the network range and speed.
- Change encryption settings to secure the network.
- Upgrade the router firmware to fix bugs.
- Set up settings.
- Block websites and web pages.
- Disconnect and remove connected devices.
- Factory reset your router.
These are some of the key functions available through the interface of your router. There are many more things as well. You can find various guides available on them.
Troubleshooting ZTE ZXHN H108N Router Issues
Sometimes you may encounter certain issues while trying to to your ZTE brand router. We know how bad it feels when you are clueless and can’t fix the problem. That’s why we are going to help you to resolve the common router issues.
1. Incorrect Router name and
If you are getting the “Incorrect name or ” error message on the screen while trying to to the router even after trying the default router credentials, then you can try resetting the router. Resetting the router will bring it back to the default/factory settings. So, you’ll be able to using the default name and then.
To reset your ZTE ZXHN H108N router, press and hold the small ‘Reset’ button present inside a hole at the back for around 20-30 seconds. You can use a needle, pin, or toothpick to do that. Once the router LED flashes, release the reset button and wait for the router to reboot.
After that, you can using the default name- , and default - .
2. Your connection is not private
Sometimes when you try to to the ZTE Router, you will land on an error page saying “Your connection is not private.” The solution to this problem is very simple.
First, click on the ‘Advanced’ option and then click on ‘Proceed to 192.168.1.1 (unsafe), and you will see the router page.
3. Can’t load this page
If the router page is not loading even when you are entering the correct IP, there may be some issues with your connection. Sometimes the WiFi connection is not stable and results in this problem. To solve the problem, you can try using a wired connection.
Another working fix to this issue is using another browser to load the router page.
Final Words
ZTE ZXHN H108N is a popular Modem Router. This is how you can to its and customize the default configurations. One thing I’d suggest that you shouldn’t make any changes that you have no idea about. Or else, you will end up ruining the settings and will have to reset them.
That’s all for this guide. I hope it helps you enough. Feel free to use the comment box to ask questions or share opinions about it.